Model Number

hijackychan at msn.com

Jacky Chan: ijackychan at msn dot com

Edge Glued Panel  edge glued board  FJL panel  finger jointed panel  finger jointed strips 

finger jointed board  finger jointed assembler wood kitchen worktop wood countertop

Size: 3000/4000*620/650/720/900/960*30/40mm.

1). The price is based on FOB China, valid until the USD/RMB=6.7. We are the supplier for

hilton hotel and US Home Depot.
Species: oak, red oak, ash, birch, beech, china cherry, Acacia, Asian maple, elm, pine,

teak, rubberwood, American walnut, Iroko, Wenge.

1. Thickness/Lamella Width: 15,18, 20, 22, 25, 28, 30, 40, 45, 48mm. Random length of

Stave:150-500mm. All staves/lamelles are cut edged 90* as disscused. Max length: 6m; max

width: 1.2m.                                                 
2. Moisture content: 8%-12%. Glue: D3(according to DIN EN 204) without open gluelines.

Sanding: grain 180 
3. Finger Joints: Quality of joints between lamellae will totally exclude breakout, gaps,

holes and excess glue on Top face. Ends well trimmed; finger joint showing on face or hiding

at side.
4. Production Capacity: about 300cbm per month
5. HS Code : 4407 Wood Sawn or Chipped Lengthwise, Sliced or Peeled

6. Quality standard

A Grade
NO decay, dead knots, heart wood, sapwood, splits, blue stain and check, allow 5mm sound

knots,
A级 不许有腐朽、 死节 、黑节 、芯材 、边材、 裂纹、 检查不许有蓝色污点，允许有5MM 以下活节.
B Grade
No decay, dead knots, heart wood, sapwood, splits, blue stain and check, allow 15mm sound

knots and colour variation.
B级 不许有腐朽、 死节 、黑节 、芯材 、边材、 裂纹、 检查不许有蓝色污点，允许有15MM 以下活节

和色差.
C Grade
No decay, heart wood, loose dead knots, splits and check, allow 25mm sound knots, black

knots, tight dead knots not bigger than 15mm, sapwood and light blue stain.
C级 不许有腐朽 、芯材 、脱落的死节， 检查不许有裂纹，允许有25MM 以下活节，15MM以下的黑节 、

不脱落的死节、 边材和轻度的蓝色污点.
AB Grade
Surface A carry out Grade A quality standard and surface B carry out Grade B quality

standard and permit slight sapwood.
AB 级： A面执行A级标准， B面执行B级标准，允许有轻度边材.
BC Grade
Surface B carry out Grade B quality standard and surface C carry out Grade C quality

standard.
BC级：B面执行B级标准，C面执行C级标准.

9. PACKING: 

strong pallets, strong cardboards (in case of each panels), a strong foil, and a very safe

packaging (plastic bands, etc.)
Normally the height of the pallet would be 700mm, or 1000mm. A 40' ctnr can load about 36m3.